HomeChemicalsSanitizers & ShockSpa Chlor Ultra 1″ Tabs

Spa Chlor Ultra 1″ Tabs

$51.25

Stabilized chlorinating granules

SPA CHLOR ULTRA is a stabilized chlorine sanitizer for spa water. Its long-lasting stabilized chlorine-based formula provides prolonged disinfection of spa water and destruction of bacteria.

Benefit

  • Controls bacteria and algae in spa water

Format: 800 g

Product Description

Recommended levels

Maintain recommended daily levels as determined by testing kit.

Free available chlorine: 3.0 – 5.0 ppm
pH: 7.2 – 7.8
Total alkalinity: 125 – 150 ppm
Calcium hardness: 150 – 200 ppm

Application method

  • If using an automatic chlorinator, fill the chamber with SPA CHLOR ULTRA 1 ” tablets and adjust flow rate according to manufacturer’s recommendations to maintain proper chlorine residual.
  • Adding tablets to the spa skimmer is an alternative chlorine feed method.

Instructions

  • Add SPA CHLOR ULTRA 1 ” according to the chosen application method.
  • Maintain water circulation for at least 1 hour.
  • Wait 5 minutes before bathing.
  • Always measure your free available chlorine level before using the spa to make sure it falls within the recommended levels.

Dosage

  • Superchlorinate a freshly filled spa (initial dosage) by adding 20 g of SPA CHLOR ULTRA 1 ” per 1,000 L of spa water.
  • Maintain (routine dosage) proper chlorine residual by adding 10 g of SPA CHLOR ULTRA 1 ” per 1,000 L of spa water, daily or as needed.
  • Persistent malodorous water is an indicator of inadequate sanitizer levels. To correct such conditions, superchlorinate spa water by adding 30 g of SPA CHLOR ULTRA 1 ” per 1,000 L of spa water. Maintain circulation at least 1 hour and wait four hours before using.
SPA SIZE1,000 L1,500 L
INITIAL DOSAGE2 tablets3 tablets
ROUTINE DOSAGE (daily)1 tablet1 tablet
MALODOROUS PROBLEMS2 tablets3 tablets


Warning

  • Direct tablet contact may cause bleaching of spa surfaces.
  • Automatic feeding devices employing these tablets must be free from other spa sanitizers to avoid the probability of an explosion.
  • DO NOT apply the product when swimmers are in the spa.

Note

  • SPA CHLOR ULTRA 1 ” contains stabilizer (cyanuric acid) which will accumulate in spa water. The use of SPA CHLOR ULTRA 1 ” for superchlorination will raise stabilizer level at a faster rate. Keep stabilizer level within 30 – 100 ppm range by dilution with fresh water.
  • Superchlorination with SPA CHLOR ULTRA 1 ” will also lower total alkalinity. Make sure that the total alkalinity stays within recommended levels.

Have a question? We’d love to help out. Use the form below and we will respond back as soon as possible.