Cra-Kel
Cra-Kel Sta-Rite Pool Heater Vent Kit CKG-1000 – 4" Stainless Steel Sidewall Venting
Cra-Kel Sta-Rite Pool Heater Vent Kit
Stainless steel sidewall venting kit designed for compatible Pentair MasterTemp and Sta-Rite Max-E-Therm pool heaters. Includes a 4-inch vent pipe, wall thimble, termination hood and associated installation components.
The Cra-Kel Sta-Rite Pool Heater Vent Kit (CKG-1000) is a stainless steel sidewall venting assembly designed for compatible Pentair MasterTemp and Sta-Rite Max-E-Therm gas pool heaters. The kit provides components used to direct heater exhaust through an exterior wall as part of an approved venting installation.
The CKG-1000 includes a stainless steel heater adaptor, 4-inch vent pipe, wall thimble, termination hood, Z-Vent sealant and installation instructions. It is listed for natural gas and propane heater applications, with the supplied installation information specifying that the heater must be positioned within 12 inches of the inside wall. Correct heater compatibility, vent configuration, clearances and code compliance must be confirmed before installation.
Key Features
Includes stainless steel venting components for the specified pool heater exhaust application.
Features a 4-inch diameter stainless steel vent pipe and matching wall thimble.
Designed to route combustion exhaust through an exterior wall when installed in an approved configuration.
Listed for Pentair MasterTemp and Sta-Rite Max-E-Therm pool heater families, subject to installation verification.
Intended for compatible gas-fired pool heater installations using natural gas or propane.
Includes the heater adaptor, vent pipe, wall thimble, termination hood, sealant and installation instructions.
Compatibility & Fitment
The CKG-1000 vent kit is listed for the following pool heater families:
- Pentair MasterTemp Pool Heaters: MasterTemp Series, subject to verification of the exact model and approved venting configuration.
- Sta-Rite Max-E-Therm Pool Heaters: Max-E-Therm Series, subject to verification of the exact model and approved venting configuration.
Installation Requirements:
- Vent Type: Stainless steel sidewall exhaust venting.
- Vent Diameter: 4 inches.
- Heater Position: Supplied installation information specifies that the heater must be within 12 inches of the inside wall.
- Fuel Applications: Natural gas and propane, where approved for the specific heater configuration.
Compatibility may vary by production year, configuration and installation. Verify your exact model and part number before ordering.
The heater manufacturer's approved venting requirements, vent termination clearances and applicable gas codes must also be confirmed. Compatibility with a heater family does not establish approval for every model or installation.
Applications
- Sidewall exhaust venting for compatible Pentair MasterTemp pool heaters
- Sidewall exhaust venting for compatible Sta-Rite Max-E-Therm pool heaters
- Installation of approved stainless steel gas heater exhaust connections
- Pool heater installations requiring a compatible 4-inch sidewall vent assembly
- Replacement or servicing of compatible pool heater venting components
This kit is intended for installations meeting the manufacturer's venting specifications, including the supplied 12-inch heater-to-inside-wall positioning requirement. A licensed HVAC contractor must verify the complete installation before use.
Professional Installation Recommended
All service and venting installation work on gas appliances shall be performed by a licensed HVAC contractor. Installation must follow the heater and vent kit manufacturers' instructions and all applicable electrical, plumbing, gas, bonding and building codes.
The supplied product information specifies that the heater must be located within 12 inches of the inside wall. Before installation, the contractor must confirm the heater's approved venting arrangement, allowable vent length, termination location, required clearances, combustion air provisions and compatibility with the supplied components.
Incorrect exhaust venting can create serious safety hazards, including the release of combustion gases. The completed installation must be inspected and verified in accordance with manufacturer requirements and applicable codes before the heater is operated.
Specifications
| SKU | CKG-1000 |
| Brand | Cra-Kel |
| Product Type | Pool Heater Sidewall Vent Kit |
| Vent Material | Stainless Steel |
| Vent Diameter | 4 Inches |
| Included Vent Pipe | 4" x 12" Stainless Steel Pipe |
| Included Components | Stainless Steel Pentair Adaptor, 4" x 12" Stainless Steel Pipe, 4" Stainless Steel Wall Thimble, Stainless Steel Termination Hood, Z-Vent Sealant and Installation Instructions |
| Compatibility | Pentair MasterTemp and Sta-Rite Max-E-Therm pool heater families, subject to verification of exact model and approved venting configuration. |
| Compatible Fuel Types | Natural Gas and Propane, Where Approved |
| Venting Configuration | Sidewall Exhaust Venting |
| Heater Position Requirement | Within 12" of the Inside Wall, According to Supplied Product Information |
| Application | Pool Heater Exhaust Venting Through an Exterior Wall |
| Installation | Licensed HVAC Contractor Required |
| Final Sale | Yes |
Frequently Asked Questions
The CKG-1000 is listed for Pentair MasterTemp and Sta-Rite Max-E-Therm heater families. However, exact model compatibility and approval of the proposed sidewall venting configuration must be verified against the heater manufacturer's instructions before ordering.
The kit includes a stainless steel Pentair adaptor, 4" x 12" stainless steel vent pipe, 4" stainless steel wall thimble, stainless steel termination hood, Z-Vent sealant and installation instructions.
The supplied product information specifies that the heater must be positioned within 12 inches of the inside wall. A licensed HVAC contractor must verify this requirement along with the approved vent configuration and applicable installation clearances.
No. All service and exhaust venting installation work on gas appliances shall be performed by a licensed HVAC contractor. Incorrect venting can create serious safety hazards, so installation must comply with manufacturer instructions and applicable gas and building codes.
The Cra-Kel CKG-1000 pool heater vent kit is designated final sale. Confirm the exact heater model, venting requirements and installation configuration before purchasing.
No product videos available for this product.