Hayward
Hayward AquaRite XL Main PCB GLX-PCB-XL-CUL – 120V
Hayward AquaRite XL Main PCB – 120V
Genuine Hayward replacement main circuit board for AquaRite XL salt chlorination systems. Factory-configured for 120V operation with spade connectors, compatible with AQR3XLCUL, AQR9XLCUL and AQR15XLCUL.
Warranty Information
6-Month Manufacturer Warranty
Ultimate Pools is your first point of contact for compatibility verification, installation guidance, and warranty support.
The Hayward AquaRite XL Main PCB (GLX-PCB-XL-CUL) is a genuine Hayward replacement printed circuit board designed for compatible AquaRite XL salt chlorine generator control units. The main PCB is an internal electronic component responsible for essential salt chlorination system control functions, including operation of the connected salt cell.
This replacement board is supplied factory-configured for 120V operation only and features spade connectors for the voltage connections. Designed for AquaRite XL models AQR3XLCUL, AQR9XLCUL and AQR15XLCUL, the GLX-PCB-XL-CUL provides a replacement option when the existing main circuit board has been diagnosed as defective. Correct model identification, voltage verification and professional electrical installation are essential before replacing the board.
Key Features
Original Hayward replacement main circuit board identified by manufacturer part number GLX-PCB-XL-CUL.
Replacement PCB for the electronic control functions of compatible Hayward AquaRite XL salt chlorination systems.
Ships from the manufacturer configured for 120V operation only.
Equipped with spade connectors for the specified voltage connections.
Compatible with Hayward AquaRite XL models AQR3XLCUL, AQR9XLCUL and AQR15XLCUL.
Designed to replace an existing AquaRite XL main board when troubleshooting confirms a circuit board failure.
Compatibility & Fitment
Compatible with the following Hayward AquaRite XL salt chlorination system models:
- Hayward AquaRite XL Salt Chlorination Systems: AQR3XLCUL, AQR9XLCUL, AQR15XLCUL
Voltage Requirement: The GLX-PCB-XL-CUL ships from the factory configured for 120V operation only. The board is equipped with spade connectors for its voltage connections. Verify the existing system's electrical configuration before ordering or installation.
Fitment Note: This replacement board is specified for the AquaRite XL models listed above. Do not assume compatibility with other Hayward AquaRite, AquaRite Pro or salt chlorination control units. Confirm the exact system model and existing circuit board part number before ordering.
Compatibility may vary by production year, configuration and installation. Verify your exact model and part number before ordering.
Applications
- Replacement of defective Hayward AquaRite XL main circuit boards
- Repair of compatible AQR3XLCUL salt chlorination control units
- Repair of compatible AQR9XLCUL salt chlorination control units
- Repair of compatible AQR15XLCUL salt chlorination control units
- Restoration of salt chlorination control functions following confirmed PCB failure
- Professional servicing of compatible 120V AquaRite XL control systems
A salt chlorination system malfunction does not necessarily indicate a failed main circuit board. Confirm the cause of the problem through appropriate system diagnostics before replacing the PCB. This replacement board is supplied in its factory 120V configuration.
Professional Installation Recommended
Electrical Component – Qualified Professional Installation Recommended
The Hayward GLX-PCB-XL-CUL is an electrical control board intended for installation inside a compatible AquaRite XL salt chlorination control unit. Installation should be performed by a qualified pool equipment technician or licensed electrical professional familiar with Hayward salt chlorination systems.
Important: This PCB ships configured for 120V operation only. Confirm the equipment's supply voltage and required board configuration before installation. Do not assume that this board is suitable for a different voltage configuration.
Disconnect and verify isolation of all electrical power before opening the control enclosure or handling the circuit board. Installation must follow the manufacturer's instructions and all applicable electrical, plumbing, bonding and building codes. Confirm the correct wiring connections and system operation before returning the equipment to service.
Specifications
| SKU | GLX-PCB-XL-CUL |
| Brand | Hayward |
| Product Type | Salt Chlorinator Main Printed Circuit Board |
| System Series | AquaRite XL |
| Factory Voltage Configuration | 120V Only |
| Voltage Connector Type | Spade Connectors |
| Application | Main circuit board replacement for compatible AquaRite XL salt chlorination control units |
| Compatibility | Hayward AquaRite XL AQR3XLCUL, AQR9XLCUL and AQR15XLCUL salt chlorination systems requiring GLX-PCB-XL-CUL. |
| Warranty | 6-Month Manufacturer Warranty |
| Final Sale | Yes |
Frequently Asked Questions
The GLX-PCB-XL-CUL is compatible with Hayward AquaRite XL models AQR3XLCUL, AQR9XLCUL and AQR15XLCUL. Verify your control unit's model number and existing PCB part number before ordering.
Yes. The GLX-PCB-XL-CUL ships from the factory ready for 120V operation only. It is equipped with spade connectors for the voltage connections.
This replacement board is specified as factory-configured for 120V only. Suitability for a 240V installation has not been confirmed. Do not install it in a different voltage configuration without manufacturer verification and qualified electrical guidance.
Not necessarily. Chlorine production problems can have several causes, including issues outside the main circuit board. Have the system properly diagnosed before replacing the PCB to confirm that the board is defective.
The Hayward GLX-PCB-XL-CUL includes a 6-month manufacturer warranty and is a final sale replacement part. Confirm compatibility, voltage configuration and the required part number before purchasing.
No product videos available for this product.