Enhance your Pura Vida Inground UV System with this genuine replacement quartz sleeve. Designed specifically for the 82PV model, this high-quality quartz sleeve ensures optimal performance and longevity of your UV water purification system. Made from durable, UV-transmissive quartz, this sleeve protects the UV lamp while allowing maximum light penetration for effective water treatment.

Key Features

• Made from high-quality, UV-transmissive quartz glass
• Outside diameter: 24.5mm, Length: 910mm
• Designed specifically for the Pura Vida 82PV Inground UV System
• Fire-polished finish for optimal performance
• Durable and resistant to thermal shock

Benefits

• Ensures optimal UV light transmission for effective water disinfection
• Protects the UV lamp from water contact and temperature fluctuations
• Extends the life of the UV system by shielding the lamp from debris and contaminants
• Maintains the lamp's ideal operating temperature of 104°F (40°C)
• Easy to clean and maintain, improving overall system efficiency

Applications

• Inground swimming pools and spas
• Water treatment systems
• Aquariums and fish tanks
• Food and beverage processing facilities
• Hospital and laboratory equipment

Installation

1. Turn off the power source and water supply to the UV system.
2. Remove the old quartz sleeve carefully, following the manufacturer's instructions.
3. Clean the quartz sleeve chamber and inspect for any debris or obstructions.
4. Gently slide the new quartz sleeve into the chamber until it rests inside the center of the internal metal basket holder at the bottom of the unit.
5. Ensure only 8-12mm (5/16"-1/2") of glass is exposed. Caution: More than 12mm exposed can cause the quartz tube to break and void the warranty.
6. Install the O-ring and spring. Slide the O-ring onto the quartz sleeve until it butts up against the chamber. Insert the spring inside the quartz tube.
7. Hand-tighten the gland nut over the quartz sleeve onto the threaded top of the chamber. Do not overtighten or use tools.
8. Reconnect the power and water supply, then test the system for proper operation.

Remember to handle the quartz sleeve with care, preferably using cotton gloves to avoid leaving oils or residue that could affect UV transmission. Regular cleaning and inspection of the quartz sleeve are recommended to maintain optimal performance of your UV system.