Yard Guard Pool Products
16x32 Yard Guard Safety Cover
16' x 32' Standard Mesh Safety Cover – Tan
Open-box Tan standard mesh safety cover with a 5' x 5' grid for rectangular inground pools, engineered for dependable off-season protection and precipitation drainage.
This Tan safety cover is being offered as an open-box product. The original packaging has been opened. Please review the product listing and available images for condition details before purchasing.
The Yard Guard Deck-Lock 16' x 32' Standard Mesh Safety Cover is designed for a conventional rectangular inground pool and features a 5' x 5' reinforced grid. Its porous mesh allows rain and snowmelt to drain through while helping keep leaves and larger debris out of the pool.
Reinforced webbing runs above and below the seams and around the perimeter to distribute load through the cover and anchoring system. Reinforced stitching and coping-protection rub strips support durability through demanding Canadian off-season conditions.
Key Features
Porous mesh lets rain and snowmelt drain through instead of accumulating on top.
Reinforced 5' x 5' grid configuration designed to distribute load through the cover and anchor system.
Webbing above and below seams and around the perimeter strengthens key load-bearing areas.
Rub strips help reduce wear where the safety cover contacts the pool coping.
Supplied with the anchoring components required for a standard Deck-Lock installation.
This open-box safety cover is supplied in Tan.
Sizing & Fit
Pool size: 16' x 32' rectangular inground pool
Approximate cover size: 18' x 34'
Grid: 5' x 5'
The listed size refers to the pool dimensions, not the finished cover dimensions. The cover provides approximately 1' of overlap per side. Pools with steps, raised walls, waterfalls, unusual deck conditions or freeform geometry may require a professionally measured custom safety cover.
Specifications
| Brand | Yard Guard Pool Products |
| Product Line | Deck-Lock |
| Product Type | Inground Pool Safety Cover |
| Condition | Open Box |
| Pool Size | 16' x 32' rectangular |
| Approx. Cover Size | 18' x 34' |
| Material | Standard porous mesh |
| Grid | 5' x 5' |
| Colour | Tan |
Choosing the Correct Safety Cover
This cover is intended for conventional 16' x 32' rectangular inground pools with suitable surrounding deck space. If you're unsure about fit, contact Ultimate Pool Service before ordering. Our pool professionals can help confirm sizing, configuration and installation requirements.
Frequently Asked Questions
The original packaging has been opened. This product is being sold as open-box inventory. Please review the listing and available product images for condition details.
This specific open-box Yard Guard Deck-Lock safety cover is Tan.
This Yard Guard Deck-Lock safety cover uses a reinforced 5' x 5' grid.
Yes. The standard mesh is porous, allowing rain and snowmelt to pass through rather than accumulating on top.
It is the pool size. The finished cover is approximately 18' x 34' to provide overlap around a standard rectangular pool.
Yes. The cover is supplied with hardware for a standard Deck-Lock installation.
No. This safety cover is designed for a standard rectangular pool. Freeform pools, or pools with obstructions located within 18" of the pool edge, require a professionally measured custom safety cover. Installing this cover on an incompatible pool configuration may result in improper fit and will void the manufacturer's warranty.
No product videos available for this product.